The memory speed is vital since it lets us determine how rapidly the CPU can perform. Though a CPU can be fast, the overall performance can be affected if the memory functions slowly. A slow memory can lead to a situation in which the system continues to wait for information instead of working to let the PC run at a fast speed. When it comes to fast memory, DDR5 RAM will replace DDR4 in almost every area in the future and TeamGroup hits shelves first with the best DDR5 RAM in quarter 3 of 2021.

For several generations, DDR has been the standard. It means that memory can transfer data at twice the speed of single data rate memory. DDR4 is the predecessor of DDR5. In simple terms, DDR5 is a type of synchronous dynamic random accessory memory. It got released in July 2020. To eliminate your confusion on how to pick up the best DDR5 ram for 12700k/ 12900k/ 13900k, we have highlighted the best ones along with a section on how to choose them.

List of The Best DDR5 RAM

So check out the thorough review of the best ddr5 ram for 12700k/ 12900k/ 13900k below.

1. TEAMGROUP Elite DDR5 32GB Kit (2 x 16GB) 4800MHz

Best DDR5 RAM for 12700k/ 12900k/ 13900k-10TechPro

In terms of speed and performance, this 32GB RAM can be one the best DDR5 RAM for 12700k/ 12900k/ 13900k. It is highly suitable for use in a computer system to streamline your everyday tasks. It complies with JEDEC standards.

The factors contributing to enhanced performance are increased burst lengths and storage units. This DDR5 RAM enables up to 32 storage units which can be enabled or disabled separately. These storage units are composed of 8 bank groups. They double the access availability from 16 banks found in DDR4 standards. Also, the DDR5 burst length is double that in DRR4.

In terms of overclocking support, this DDR5 memory has a quite larger room for voltage adjustment.  One of the key reasons behind this is the upgraded power management ICs (PMIC). The same enables support for voltages higher than 2.6V. Existing DDR4 memory modules managed their voltage conversion via the motherboard but this is not the case with DDR5. Those components needed for the voltage conversion are transferred to the memory DIMM itself. Consequently, it leads to voltage drop and generation of noise. At the same time, it offers possibilities for overclocking. This DDR5 memory also supports on-die ECCs. This feature automatically corrects DRAM cells. Hence, stability is great. The design features a black PCB without a heatsink.

Key Features

  • At minimum specifications, this RAM reaches an ultra-high frequency of 4800 MHz. This frequency is 50% higher than the standard frequency maximum of the DDR4 modules.
  • This DDR5 kit is accessible from a 16 GB capacity per module. Its capacity can be expanded to 128 GB to explore the memory and provide a smooth multitasking experience.
  • Data transfer bandwidth is 38,400 MB/s.
  • Reduced working voltage leads to better energy efficiency.
  • The standard working voltage is decreased from 1.2V found in DDR4 modules to 1.1V. The same results in a reduction in energy consumption for every bandwidth. So, there will be energy conservation.
  • To limit noise interference, the power management is conveyed from the motherboard to the RAM. The same would be complemented with a PMIC for efficient system load management.

Pros And Cons

  • Support for on-die ECC offers stable performance
  • Increased fundamental frequency leads to faster speeds
  • Power multitasking
  • Enhanced structural composition offers great efficiency
  • Not much suitable for very high-speed data transfer


Best DDR5 RAM for 12700k/ 12900k/ 13900k-10TechPro

The CORSAIR VENGEANCE 32GB DDR5 RAM offers cutting-edge performance for your PC. With blistering 5600MHz speeds and latencies of CL36, this dual-channel 32GB DDR5 RAM kit pushes your system’s capabilities beyond that of previous generations. The tightly-screened memory chips enable aggressive timings for smooth system performance. Onboard voltage regulation allows for easy and stable overclocking through CORSAIR’s iCUE software. You can even save custom Intel XMP 3.0 profiles to optimize performance for specific apps.

The low-profile aluminum heat spreader keeps temperatures down while fitting into tight spaces. With a limited lifetime warranty, CORSAIR ensures the reliability of this high-performance DDR5 memory. If you’re building an elite Intel-based system, the VENGEANCE 32GB DDR5 kit provides the speed, capacity, and features to maximize your PC’s performance.

Pros And Cons

  • Fast 5600MHz speed and CL36 latency for smooth performance
  • 32GB capacity handles demanding apps and multitasking
  • Onboard voltage regulation enables easy and stable overclocking
  • Custom XMP 3.0 profiles optimize performance
  • May require motherboard BIOS update for compatibility

3. G.SKILL Trident Z5 RGB series DDR5 RAM

Best DDR5 RAM for 12700k/ 12900k/ 13900k-10TechPro

The G.SKILL Trident Z5 DDR5 memory delivers blazing fast speeds and responsive multitasking performance perfect for high-end gaming rigs and workstations. With a 32GB kit containing 2 x 16GB DDR5 modules, it provides a massive memory running at a lighting fast 6000MT/s speed with CL36 latency out of the box. The premium dual-texture heatspreader with RGB lighting allows you to customize the look while helping maintain peak performance.

Built using high-quality DDR5 DRAM ICs and engineered for overclocking, each Trident Z5 DDR5 RAM module can reach extreme speeds beyond 6000MT/s when paired with a compatible Z690/Z790 motherboard and 12th/13th Gen Intel Core CPU. Just enable the easy one-click XMP 3.0 profile in the BIOS to instantly unlock the full overclocked potential up to 6000MT/s for incredible bandwidth and responsiveness. With massive capacity, low latency, customizable style and simple overclocking, the G.SKILL Trident Z5 RGB DDR5 RAM is the ultimate choice for gaming and creative workstation PCs.

Pros And Cons

  • 6000MT/s speed provides incredible bandwidth and responsiveness
  • 32GB capacity gives massive room for multitasking and future proofing
  • Low CL36 latency delivers quick response times
  • Sleek, customizable RGB lighting fits any build theme
  • Easy XMP 3.0 overclocking
  • Overclocking relies on compatible Z690/Z790 motherboard and 12th/13th Gen Intel CPU

DDR5 RAM Buying Guide

DDR5 is a Double Data Rate 5 random access memory that is set to surpass DDR4 in various aspects. It conveys faster speed, greater bandwidth, and improved power efficiency. When you choose the best DDR5 RAM, you obtain all these benefits and many more. Each generation of DDR memory boasts a speed that is steadily increased from the predecessor. This is because manufacturers made enough improvements to the existing architecture.

DDR5 RAM’s base frequency begins at 4,800 MHz and its maximum limit is 8,400 MHz. This upper limit of frequency is higher than even the most extreme overclocks found on DDR4. The average clock speed can lie anywhere in between. But, the same also depends on your processor.

It is observed that DDR5 conveys incremental improvements compared to the previous standard. The maximum capacity found in a DDR4 DIMM stick is 32 GB whereas this value is found to be 128 GB in DDR5 RAM. Essentially, it depends on programmers and game developers to code their software so that they benefit the most.


The DDR5 RAM design assures to hit shelves through double the density as well as double the speed compared to first-gen DDR4-3200 modules. The maximum memory capacity is 32 GB in DDR4 whereas it is 128 GB in DDR5. Higher data rates, higher density per stick, reduced overall power consumption, and improved burst length suggests how beneficial DDR5 RAM is compared to DDR4 RAM. Check Altium DDR5 PCB Design requirements if you are designers for DDR5 projects.

1. DDR5 frequency increase

DDR5 RAM shows the same latency as DDR4 and DDR3. However, it supports more bandwidth than DDR4. The maximum bandwidth for data rates is 3200 MHz in DDR4 RAM whereas the minimum bandwidth of DDR5 memory has been increased to 3200MHz, generally to 4800MHz, and the highest frequency defined by the JEDEC standard can reach 6400 MHz. If XMP overclocking is turned on, it may reach much higher, and the current data shows it can reach 8400MHz. The data rate in DDR5 begins at 4,800 MHz which is a 1.8 times improvement compared to DDR4. Moreover, DDR 5 would also excel in speed over time to provide faster raw performance compared to DDR4.

If you only compare them by the frequency, under the same capacity, the performance of a 4800MHz DDR5 memory bank is 1.5 times that of a 3200MHz DDR4 memory bank. You can also simply understand that in the same time, DDR5 RAM run 3 laps while DDR4 RAM run only 2 laps.

2. DDR5 operating voltage is reduced

Another key difference is that DDR5 uses less power than DDR4. Unlike DDR4 that works on 1.2V standard voltage, DDR5 works on 1.1V. This suggests reduced power draw and ultimately high power efficiency. The maximum device density is 16 GB in DDR4 whereas it is 64 GB in DDR5. Though this difference in voltages may not be significant, it conveys a considerable reduction in power requirements i.e. 20%. In short, as the DDR5 frequency increases, the power consumption of the entire memory is also increasing rapidly, so it is necessary to reduce the voltage to 1.1V for reducing the overall power consumption.

One major difference found is in terms of power architecture. When using DDR5 DIMMs, power management transfers from the motherboard to the DIMM itself. Specifically, DDR5 DIMMs would have a 12V power management IC (PMIC) over DIMM. This aspect lets the DDR5 RAM better handle system power loading. Furthermore, the PMIC allocates the 1.1 V VDD supply. As a result, it helps in signal integrity, noise, and improved on-DIMM regulation of the power supply.

3. ECC feature decentralization

Error Correcting Code is a memory error correction mechanism. 1bit data may jump in the memory during operation. With ECC characteristics of the memory can actively correct errors and maintain the long-term stable operation of the system.

Desktop DDR5 RAM contains some error-correcting code (ECC) on-chip. This feature was previously only available for server memory, which usually can be saw on enterprise-level memory products. So, it would enhance improve the memory’s reliability since it reduces errors. Moreover, it improves the reliability of applications being used by up to 20 times when compared to DDR4.

4. The upper limit of single DRAM increase

This means a larger single memory upper limit. In the past, we saw that a single 32GB memory basically used off. supporting a single DRAM with a larger capacity this time may let us to see a single 64GB or even 128GB memory bank appearing.

However, the current memory demand is not so large in the consumer-level market, it may still be used on high consumer platforms. Do not worry that your DDR5 memory slot is not enough, two large-capacity memory sticks are enough for you to use the as a system disk.

5. Other advanced performance

It is observed that DDR5 modules can integrate onboard voltage regulators for attaining higher speeds. However, this will compromise on cost. The same is anticipated to be implemented on server-grade and high-end consumer modules only. In each module, DDR5 supports 51.2 GB/s sped and two memory channels.

DDR5 RAMs are made available in bigger capacities, ranging from 8 GB modules to 32 GB modules. This is twice the capacity of DDR4 which is 4 GB to 16 GB.  These modules decide the size of the RAM chips which are installed in the PC. This suggests that DDR5 offers double the capacity of DDR4.

DDR4 RAM supports BL8 burst length whereas DDR5 RAM supports BL16 and BL32 burst lengths. This enables 64 GB cache line to fetch only one DIMM sub channel. When you pick a DDR5 RAM with burst length 16, it enables a single burst to access 64 bytes of data. This represents the typical CPU cache line size. This is accomplished using just one of the two independent channels. Consequently, it offers a noteworthy improvement in concurrency and the two channels suggest higher memory efficiency.

What To Consider When Picking The Best DDR5 RAM?

At first glance, it may seem confusing on how to choose the best DDR5 RAM. When you carefully analyze your system needs and the features anticipated, it becomes quite easy to choose a suitable DDR5 RAM. The following section familiarizes you with what aspects to keep in mind while picking a DDR5 RAM.

Though the first DDR5 is released, DDR5 RAMs are not widely available commercially. Essentially, there is always a time gap existing between a new iteration of DDR memory being developed and the date when it is released. Also, there is another time gap between when it’s released and when it would go mainstream. Presently, we are awaiting its CPU compatibility.

The cutting-edge Zen 3 CPUs by AMD only support DDR4 memory. It is expected that the manufacturer will only offer DDR5 support with those Zen 4 CPUs which are planned to launch in 2022.

The answer to the question i.e. whether to go for a DDR5 RAM depends on what are your priorities when it comes to PC build. If your priority is performance then you need to go for DDR4 RAM. This is because it offers significantly improved performance than its predecessor.

Keep in mind that DDR5 offers significant in-game performance improvement. So, serious gamers can go for DDR5 RAM. Especially the professionals and gamers will prominently reap the benefits of DDR5 RAM.

If you are more concerned with value and affordability then don’t pick DDR5 RAM. This is because DDR5 RAMs come at expensive price tags.  For those individuals who want a good bang for their bucks, DDR5 RAM is not a suitable option.

For futureproofing, investment in DDR5 RAM is worthwhile. Also, compatibility is a huge factor when the matter comes to RAM. Hence, if you intend to build a machine that would be convenient to upgrade in the future then you can go for DDR5 RAM and DDR5-compatible hardware.

Frequently Asked Questions When Picking The Best DDR5 RAM

1. Which are the companies that are working on making DDR5 commercially available to the public?

Currently, there are 3 companies involved in sampling DDR5 DRAMS. Their names are Samsung, SK Hynix, and Micron. 

2. Can DDR5 RAM be available for mobile phones?

No, because DDR5 is for laptops, desktops, and servers. LPDDR5 would be available for mobile phones. 

3. Can DDR5 RAM be found in a DDR3 or DDR4 compatible laptop?

Yes, the latest JEDEC spec depicts that DDR5 262 Pin SODIMM has a unique mechanical notch which would be quite different from DDR3 and DDR4. Therefore, a DDR5 SODIMM cannot be installed in a DDR3 or DDR4 compatible laptop. 

4. Will it cost more to buy DDR5 RAM?

Yes, for the initial few years, DDR5 will be quite expensive than DDR4. Moreover, the cost will rely on supply and demand. To get the best DDR5 RAM, you need to pay higher.

5. How does DDR5 RAM provide higher gain efficiency than DDR4 RAM?

The design and features of the DDR5 RAM improve the overall gain efficiency of the system. The reason is the burst length of a DDR4 RAM is usually up to 8 but that in a DDR5 RAM is up to 32. In the future, the burst length of DDR5 RAMs will be further extended along with burst chop.

6. What is the lifespan of a DDR5 RAM?

Every DDR5 RAM can work flawlessly for years. Its lifespan depends on factors like your type of usage, the performance of other components within the CPU, and the existing situation. When you are using DDR5 RAM, you need to keep several things in mind if you want to prolong its lifespan. Make sure not to abuse it, not to use it with an unsteady power supply, and don’t overheat your system.

7. What support features will be found in DDR5 RAMs?

Compared to DDR4 RAMs, DDR5 RAMs come with better and more feasible support features. Specifically, DDR5 RAMs will support read and write CRC model, post package repairs, ETM or Error Transparency Mode, and on-die Error Correction Codes. These support features will improve the total capacity of the memory.

Should You Get The DDR5 RAM Right Now?

Currently various manufacturers announced DDR5 RAM products, the frequency starts from 4800MHz, while the frequency is increased, the performance is also better. At the same time, the capacity of DDR5 memory is also larger than before, and the operating voltage of the memory is 1.1V, which is lower than the 1.2V of DDR4 RAM. In a word, the advantages of DDR5 memory are faster speed, lower power consumption, and support for core-level ECC error correction. The advantages of DDR5 memory are such obvious, and from the sources of all parties, both DDR5 memory products and related platforms will be put on the market this year, so should we abandon DDR4 RAM and wait for DDR5 RAM directly?

It will take times for DDR5 RAM to become popular

Although many RAM manufacturers pay more attention to DDR5 memory and will be launched samples of DDR5 memory. Without hesitation that DDR5 memory wants to replace DDR4 RAM, the listing price of DDR5 RAM will not be cheap and you can get a glimpse of support progress only from the platform.

For Intel platform

As for Intel, the launched 12th-generation core of Alder Lake will support for DDR5 memory at the end of the year. However, according to the current situation, this generation of core platforms should also exist with DDR4 and DDR5. It has been revealed that ASUS high-end Z690 motherboards will be equipped with DDR5 memory, and the low-end and mid-range will continue to partner with DDR4. It can be seen that on the 12th-generation Alder Lake Core platform, DDR5 may be used by high-end users. The high price is not affordable for normal users, they will still choose DDR4 memory. Of course, it does not rule out that in the mid-end will provide both DDR5 and DDR4 memory slots. There were such products in the transitional era of DDR2/3 and DDR3/4, but this is not the mainstream.

For AMD platform

As for AMD, the time to market for the new Zen4 platform is not sure. It was said early that the Zen4 processor which supports DDR5 memory will be on the market this year. But the latest news says that before Zen4, AMD still has a generation of transitional upgraded version of Zen3 XT or Zen3 Refresh . It will not be announced until September to October 2022, and it will put on market from October to November. That is to say, from now on we will wait one and a half years to get the Zen4 architecture Ryzen 7000 processor.

It can be seen that the popularizing of DDR5 is actually not fast. Although the Intel platform is the first one to support DDR5, it may only be supported by high-end motherboards. The AMD Zen4 platform will not be launched even next year. It can be said that DDR5 memory will not be popular until 2022 in the consumer-grade market. If you can’t wait for a long time, you can continue to use DDR4.

Final Thoughts

When you pick the best DDR5 RAM, you will perceive a massive advancement in PC memory. The significant performance improvements positively influence your workflows. The higher high memory capacity limit compared to its predecessors facilitates huge amounts of memory when compared to contemporary PCs. Whether it is for professional usage or gaming or video editing, etc., you will notice a great improvement in performance.

Enjoyed this article on the best DDR5 RAM? Then be sure to check out other guides.